Showing posts with label Porsche. Show all posts
Showing posts with label Porsche. Show all posts

Tuesday, September 14, 2010

Great Expectations _ 2011 Porsche 911


Porsche is one of the most recognized automotive sports car brands that touts some of the most subtle changes over the longest period of time for its iconic 911. The Porsche 911’s history will tell us not to expect much to be changed on the upcoming 2011 Porsche 911 but according to various sources such as Automobile Magazine, we may see a “big” change.

Over the past couple years Porsche has seen a decline in sales numbers for the 911 in-part due to the new Panamera and Cayenne sales. Other reasons for these numbers are rather obvious when look at the current economic conditions. A new fresh product for any automaker is a gamble but what if the ‘new’ product carries almost 50 years successful of history in the sports car market?

The newest Porsche 911, codenamed 991, will be ‘all-new’ incorporating new advancements such as a redesigned suspension, electrically-assisted power steering, push-button handbrake, optional twenty-inch wheels, seven-speed manual transmission and the obvious… more powerful engine availability. The new 911 will be about 100 pounds lighter and 10 percent more efficient than the current model.


Porsche 911 rendering (not an actual representation)

The rear-engine layout will remain the same with the rear axle pushed back about 3 inches. After all, this is a Porsche 911 we are talking about here. The efficiency of the new 911 will be mainly due to refined aerodynamics, battery management technology that incorporates start-stop technology with brake energy regeneration.

What else should we expect from the 2011 Porsche 911? How about 20-inch wheels, larger brake discs and six-piston front brake calipers for the Carrera S? Depending on the model, the 911 will be sitting about .4 to .8 inches lower. The base Carrera will have dual oval exhausts, 19-inch wheels, black brake calipers and the typical motorized tail spoiler that automatically extends at 60mph.

The 911’s evolution remains to be restrained from any drastic changes. As such, the Carrera will get a 3.4-liter 350hp direct-injection flat-six. If you are not taking notice, that is 5hp more than the current 3.8-liter. The Carrera S will get a 400hp 3.8-liter. Can’t wait to see what the Carrera S will do with 400 horsepower sent through a 7-speed manual tranny!

Expect to see a cabriolet version of the 911 a year after the coupe debuts. Supposedly the traditional canvas top is gone in place of a man-made fabric covered hard-top retractable roof. This only adds to our excitement… Can’t Wait!

Saturday, August 28, 2010

TechArt Widebody Based on The Porsche Boxster

TechArt Widebody Based on The Porsche Boxster
TechArt Widebody Based on The Porsche Boxster
TechArt Widebody Based on The Porsche Boxster
Athletic Beauty: TechArt Widebody based on the Porsche Boxster (987)

The Athletic beauty: The TechArt Widebody based on the Porsche Boxster of the 987 model range doesn't only offer spectacular design but also extra driving fun and agility. After the huge success of the Widebody concept for the first Boxster generation, TechArt Automobildesign ( www.techart.de ) developed a wide body version for the current version of the roadster.

With the add-on fender flarings on front and rear axle the TechArt Widebody is eight centimeters wider than the standard car. The front extensions don't only provide extra room inside the wheel houses but also improve the deventilation of the heated up air with their integrated wheel-house ventilation. The rear flarings are equipped with largely dimensioned air ducts to bring fresh air to the centrally placed engine.

Apart from spectacular, sporty design the TechArt designers of course paid attention to optimal aerodynamic efficiency. The TechArt front spoiler bumper reduces the lift at the front axle and improves the cooling of the front brakes with large air ducts. The TechArt rear apron with integrated diffuser rounds out the conversion.

Extremely broad wheels and tires make the TechArt Widebody concept for the Boxster complete: Specially for this wide body version they developed custom-made versions of the one-piece TechArt Formula five spoke wheel. The front axle is equipped with wheels in size 8.5Jx20, the rear axle is equipped with 11Jx20 wheels.

TechArt Widebody Based on The Porsche BoxsterTechArt Automobildesign recommends ContiSportContact 2 high performance tires in sizes 235/30 ZR 20 front and 305/25 ZR 20 rear for the Widebody based on the Porsche Boxster. The height-adjustable TechArt sport suspension is specially set-up for these ultra-wide wheels and tires and the wider track of the car. The coil-over suspension doesn't only provide an individual damping of the roadster but also lowers the two-seater car by some 25 millimeters. Boxster models with PASM system can be updated with the sporty set up TechArt coil over sport suspension.

TechArt also offers engine tuning for the Widebody. The two watercooled six-cylinder boxer engines can be upgraded with the TechArt power kits. They each consist of a sport air filter and newly programmed engine electronics. The result: 15 hp / 11 kW extra power and optimized road performance.

TechArt Widebody Based on The Porsche Boxster
Being world-wide renowned specialists for exclusive interiors, TechArt provides individual full leather trims in all colors and designs. The range reaches from completing the ex-works leather trims up to a completely redesigned cockpit with special sports seats and ergonomically shaped airbag sports steering wheel.

Wednesday, June 2, 2010

2013 Porsche Sports Cars 918 RSR Race Car

13-year-old WCF member and Porschephile, porschecarreragtmay6, has created some renderings of a Porsche 918 RSR race car. Based on the 918 Spyder concept, the pictures show a hardcore coupe, wearing some classic Porsche liveries, designed to compete in the GT1 class.
2013 Porsche Sports Cars 918 RSR Race Car
Although these renderings were created back in March, shortly after the 918 Spyder's surprise unveiling in Geneva, they provide a potential glimpse of a race spec 918 in the wake of recent reports that Porsche will field the 918 Spyder at the 24 Hours of Nurburgring in 2011.
The 2013 Porsche 918 RSR Race Car comes with 2 electric motors and a 500hp V8 from the “RS Spyder” LMP-2 car. The 918 RSR Race Car will drop the electric motors, but will retain the KERs and 500 hp V8. Since GT1 regulated no more than 600 hp, Porsche may remove air-restrictors from the engine to boost the output to 600hp.
As a refresher, the 918 Spyder concept featured a 368 kW (500 PS / 493 hp) V8 engine and three electric motors with a total of 160 kW (218 PS / 215 hp). Packing a combined 528 kW (718 PS / 708 hp), the Spyder sent power through a PDK dual-clutch gearbox (with an electric boost function) to an electric all-wheel drive system.
The 918 RSR model will race the same competitions as the classical 917 race car. It will drop the electric motors, but will retain the KERS and the 500hp V8. Since the GT1 regulates no more than 600hp, Porsche may remove air-restrictors from the engine to boost the output to 600hp. The "918 RSR" will be able to hit a top speed of 200mph and will make the 0 to 60 mph sprint in than 3.0 seconds.
It will feature a wider track, redesigned front and rear diffusers, as well as a fixed hard-top roof and a huge rear wing. The liveries on these images were created based off of the classic Porsche liveries and designed to compete in the GT1 class.
The Porsche 918 RSR Race Car will top in the 200mph range and will reach 62mph in less than 3.0 seconds, possibly 2.8 seconds. The weight will be around 1,240 kilos, 2,730 lbs.
The weight loss will comes from the loss of the batteries stripped interior and loss of amenities even more extensive use of carbon fiber and a reconstruction of body work.

Thursday, May 27, 2010

2010 Porsche Sports Cars 911 GT3 R Hybrid

Known as the 2010 Porsche 911 GT3 R Hybrid, the model hints at new hybrid technology that Porsche Sports Cars will use in its motorsport ventures. According to Porsche, the 911 GT3 R Hybrid will be used as a study to gather information about how hybrid drive will behave under a racing environment and will also help the German automaker study how it can be applied to its road cars.
2010 Porsche 911 GT3 R Hybrid
During Porsche's press conference here at the Geneva Motor Show, most of our attention was understandably on the 918 Spyder Concept, but the German automaker had several other significant debuts. One was the 911 GT3 R Hybrid, Porsche's first race car to feature electric power sourced from a duo of motors that send power to a generator attached the flywheel. Like many hybrid production cars, the motors are charged whenever the brakes are applied, and the driver can use the extra power for 6-8 seconds for overtaking.
Exactly 110 years after Ferdinand Porsche developed the world's first car with hybrid drive, the Lohner Porsche Semper Vivus, Dr. Ing. h.c. F. Porsche AG, Stuttgart, is once again taking up this visionary drive concept in production-based GT racing: During the Geneva Motor Show, a Porsche Sports Cars 911 GT3 R with innovative hybrid drive is making its debut, opening up a new chapter in the history of Porsche with more than 20,000 wins in 45 years scored by the extremely successful Porsche 911 in racing trim.
Unlike a conventional battery-electric hybrid system the Porsche 911 GT3 R uses a flywheel system, which gathers kinetic energy under braking to power two electric-motors that are mounted in a single assembly and are connected to the front wheel. After each boost of charge, the two motors provide 6 to 8 second jolts of power. The extra power is engaged by pressing a button on the steering wheel, providing up to 161-hp to the front wheels, assisting the 911 GT3 R Hybrid’s 480-hp 4.0L inline-6 that powers the two rear-wheels.
The innovative hybrid technology featured in the car has been developed especially for racing, standing out significantly in its configuration and components from conventional hybrid systems. In this case, electrical front axle drive with two electric motors developing 60 kW each supplements the 480-bhp four-litre flat-six at the rear of the 911 GT3 R Hybrid. A further significant point is that instead of the usual batteries in a hybrid road car, an electrical flywheel power generator fitted in the interior next to the driver delivers energy to the electric motors.
The flywheel generator itself is an electric motor with its rotor spinning at speeds of up to 40,000 rpm, storing energy mechanically as rotation energy. The flywheel generator is charged whenever the driver applies the brakes, with the two electric motors reversing their function on the front axle and acting themselves as generators. Then, whenever necessary, that is when accelerating out of a bend or when overtaking, the driver is able to call up extra energy from the charged flywheel generator, the flywheel being slowed down electromagnetically in the generator mode and thus supplying up to 120 kW to the two electric motors at the front from its kinetic energy.
This additional power is available to the driver after each charge process for approximately 6 - 8 seconds. Energy formerly converted - and thus wasted - into heat upon every application of the brakes, is now highly efficiently converted into additional drive power.
Depending on racing conditions, hybrid drive is used in this case not only for extra power, but also to save fuel. This again increases the efficiency and, accordingly, the performance of the 911 GT3 R Hybrid, for example by reducing the weight of the tank or making pitstops less frequent.
After its debut in Geneva the 911 GT3 R Hybrid will be tested in long-distance races on the Nürburgring. The highlight of this test programme will be the 24 Hours on the Nordschleife of Nürburgring on May 15th and 16th. The focus is not on the 911 GT3 R Hybrid winning the race, but rather serving as a spearhead in technology and a 'racing laboratory' providing know-how on the subsequent use of hybrid technology in road-going sports cars.
The 911 GT3 R Hybrid is a perfect example of the Porsche Intelligent Performance philosophy, a principle to be found in every Porsche: More power on less fuel, more efficiency and lower CO2 emissions - on the track and on the road.

Wednesday, May 26, 2010

2010 New Porsche Sports Cars 911 GT3 R

Porsche has unveiled the 2010 new Porsche 911 GT3 R. The 911 GT3 R will be raced in series based on the international FIA GT3 regulations, thus succeeding the 911 GT3 Cup S. The 911 GT3 R is powered by a four-litre six-cylinder boxer engine delivering maximum output of 480 bhp (353 kW) transmitted to the rear axle by a sequential six-speed dog gearbox.
2010 New Porsche Sports Cars 911 GT3 R
The GT3 R offers 30 bhp more than the Porsche 911 GT3 Cup model. Both cars are based on the extra-wide body of the 911 GT3 RS street-legal sports car.
Porsche AG continues to work deep into the 2010 competition season. The new Porsche 911 GT3 R replaces the 911 GT3 Cup S in the range of competing models of the brand. The 911 GT3 R participate in the tests based on international regulations FIA GT3. A sequential gearbox six-speed is responsible for transmitting that power to the rear axle.
It is based on the Porsche 911 GT3 Cup, presented in September 2009, and intended to compete in single-brand glass. With the increase in displacement at 0.2 liters, the GT3 R achieves 30 hp increase in power compared to GT3 Cup racing Both vehicles take the widened bodywork of the 911 GT3 RS series.
The antilock brake system (ABS), traction control and electronic throttle prepared to adapt the engine speed in each gear change, making it much easier driving in relation to its predecessor, so this new model will also most appropriate for amateur drivers.
The Porsche 911 GT3 R weighs 1,200 kg, comes with an anti-lock brake system (ABS), traction control and an e-gas with “throttle-blip” function make it much easier to get used to this new GT3 racing car than its predecessor, meaning that the new model is also more appropriate for the ambitious amateur racing driver.
The flared wheel arches, both in the front and the rear channels show a higher compared with the previous model. The underside of the vehicle are fully lined and features a rear diffuser. The possibilities of regulating the rear wing have also been increased. The race suspension has several settings.
Front, McPherson has a structure adjustable in height, with SACHS shock variables and two-way dual dock. Behind, the GT3 R has a highly rigid sub-frame, with a multilink axle adjustable height and the Sachs shock absorber adjustable two-way dual dock.
The Porsche 911 GT3 R is making its world debut on 14 January 2010 at the Birmingham Motor Show and the price is 279,000 Euros.

Thursday, May 20, 2010

2010 Porsche Sports Car 911 Tequipment

Porsche Tequipment has announced four new items for the 2010 Porsche Sport Car Classic 911. The new 2010 Porsche 911 Tequipment list includes sport classic wheels, a PDK steering wheel with gearshift paddles, an Aerokit Cup and a sport design front body panel. The new 2010 Porsche 911 Tequipment wheels come in 11.5 J x 19 ET 50 and are priced at Euro 5,569.20 including VAT. For the cars with tire pressure control the price is 5,866.70 EUR.
Porsche Sports Car 911 Tequipment
The 2010 Porsche 911 Tequipment three-spoke sports steering wheel with gearshift paddles is priced from Euro 940.10 and can be fitted to all versions of the 911, Boxster, Cayman, and Panamera. The 2010 Porsche 911 Tequipment Aerokit Cup is available for the coupe and is priced at Euro 4,522.00.
The Porsche 911 (pronounced as Nine Eleven, German: Neunelfer) is a 2-door sports coupe made by Porsche AG of Stuttgart, Germany. It has a distinctive design, rear engined and with independent rear suspension, an evolution of the swing axle on the Porsche 356.
Porsche Sports Cars Press Release:
Four new retrofit highlights from Dr. Ing. h.c. F. Porsche AG, Stuttgart, are dedicated entirely to the spirit of sporting performance. Particularly the 19-inch Sport Classic wheels in the unmistakable look of Porsche’s legendary Fuchs rims developed especially for the 911 Sport Car Classic built in a production run of just 250 units are an outstanding example of Porsche’s history and a striking design feature of the 911 Carrera.
Re-interpreted in individual style, the wheels in five-spoke design with the rim star painted black, the wheel hump in gloss-lathed finish, and the Porsche logo in colour on the wheel hub, are a genuine eye-catcher. Introduced by Porsche for the first time in 1966, these unique wheels are now making an outstanding come-back. The new wheels measure 8.5 J x 19 ET 55 and come together with tyres in 235/35 ZR 19 (front) and, respectively, 305/30 ZR 19 (rear) on all current all-wheel-drive models of the 911 Carrera and Targa as well as the 911 Turbo at an all-in price per set of Euro 5,569.20 including VAT (cars with tyre pressure control Euro 5,866.70).
Another particularly sporting feature is the three-spoke sports steering wheel with gearshift paddles for the PDK transmission already well known from the new 911 Turbo. Starting immediately, this unique leather steering wheel with gearshift paddles behind the right and left steering wheel spokes carried over from motorsport is available at a price of Euro 940.10 including VAT also for individual retrofitting on all versions of the 911, Boxster, Cayman, and Panamera with PDK and, starting in August 2010, on the new Cayenne with Tiptronic S.
The high-quality shift paddles are naturally made of metal. Through their stretched sickle shape, the gearshift paddles allow the driver to shift gears manually with perfect ease, from a wide range of individual holding positions on the steering wheel. The driver shifts up on the right and down on the left.
The newly developed Aerokit Cup available on all versions of the 911 Carrera Coupé shows a close and direct link to the fastest brand trophy in the world, the Porsche Mobil 1 Supercup. At the front of the car the most outstanding feature is the new apron with its striking trim bars in the centre air intake and the characteristic spoiler lip. At the rear the unique rear lid with the wing fitted in position takes up the highly successful design of the former model. It almost goes without saying that all components have been optimised in Porsche’s wind tunnel to improve both driving behaviour and aerodynamics.
Already available on new cars at a price of Euro 4,968.25 including VAT, the Aerokit Cup may now also be retrofitted on current models of the 911. In this case the price from Porsche Tequipment is Euro 4,522.00 including VAT, plus fitting and paintwork.
While so far the Aerokit with its particularly sporting look was not available to drivers of the 911 Cabriolet and Targa (997), the new, striking Sport Design front apron now closes this gap, with the spoiler lip matched aerodynamically to the regular rear spoiler. Naturally, the new front panel also fits on all other versions of the 911 Carrera and 911 Targa in the 997 model series. Finished in the same colour as the car itself, the front apron in Sport Design blends harmoniously with the overall contours and silhouette of the 911.
The Aerokit retails on new cars at a price of Euro 2,368.10 including VAT and is available from Porsche Exclusive. It may also be retrofitted individually by Porsche Tequipment at a price of Euro 2,159.85 including VAT, plus the cost of fitting and paintwork.

2010 Porsche Sports Car 911 Tequipment

Porsche Tequipment has announced four new items for the 2010 Porsche Sport Car Classic 911. The new 2010 Porsche 911 Tequipment list includes sport classic wheels, a PDK steering wheel with gearshift paddles, an Aerokit Cup and a sport design front body panel. The new 2010 Porsche 911 Tequipment wheels come in 11.5 J x 19 ET 50 and are priced at Euro 5,569.20 including VAT. For the cars with tire pressure control the price is 5,866.70 EUR.
Porsche Sports Car 911 Tequipment
The 2010 Porsche 911 Tequipment three-spoke sports steering wheel with gearshift paddles is priced from Euro 940.10 and can be fitted to all versions of the 911, Boxster, Cayman, and Panamera. The 2010 Porsche 911 Tequipment Aerokit Cup is available for the coupe and is priced at Euro 4,522.00.
The Porsche 911 (pronounced as Nine Eleven, German: Neunelfer) is a 2-door sports coupe made by Porsche AG of Stuttgart, Germany. It has a distinctive design, rear engined and with independent rear suspension, an evolution of the swing axle on the Porsche 356.
Porsche Sports Cars Press Release:
Four new retrofit highlights from Dr. Ing. h.c. F. Porsche AG, Stuttgart, are dedicated entirely to the spirit of sporting performance. Particularly the 19-inch Sport Classic wheels in the unmistakable look of Porsche’s legendary Fuchs rims developed especially for the 911 Sport Car Classic built in a production run of just 250 units are an outstanding example of Porsche’s history and a striking design feature of the 911 Carrera.
Re-interpreted in individual style, the wheels in five-spoke design with the rim star painted black, the wheel hump in gloss-lathed finish, and the Porsche logo in colour on the wheel hub, are a genuine eye-catcher. Introduced by Porsche for the first time in 1966, these unique wheels are now making an outstanding come-back. The new wheels measure 8.5 J x 19 ET 55 and come together with tyres in 235/35 ZR 19 (front) and, respectively, 305/30 ZR 19 (rear) on all current all-wheel-drive models of the 911 Carrera and Targa as well as the 911 Turbo at an all-in price per set of Euro 5,569.20 including VAT (cars with tyre pressure control Euro 5,866.70).
Another particularly sporting feature is the three-spoke sports steering wheel with gearshift paddles for the PDK transmission already well known from the new 911 Turbo. Starting immediately, this unique leather steering wheel with gearshift paddles behind the right and left steering wheel spokes carried over from motorsport is available at a price of Euro 940.10 including VAT also for individual retrofitting on all versions of the 911, Boxster, Cayman, and Panamera with PDK and, starting in August 2010, on the new Cayenne with Tiptronic S.
The high-quality shift paddles are naturally made of metal. Through their stretched sickle shape, the gearshift paddles allow the driver to shift gears manually with perfect ease, from a wide range of individual holding positions on the steering wheel. The driver shifts up on the right and down on the left.
The newly developed Aerokit Cup available on all versions of the 911 Carrera Coupé shows a close and direct link to the fastest brand trophy in the world, the Porsche Mobil 1 Supercup. At the front of the car the most outstanding feature is the new apron with its striking trim bars in the centre air intake and the characteristic spoiler lip. At the rear the unique rear lid with the wing fitted in position takes up the highly successful design of the former model. It almost goes without saying that all components have been optimised in Porsche’s wind tunnel to improve both driving behaviour and aerodynamics.
Already available on new cars at a price of Euro 4,968.25 including VAT, the Aerokit Cup may now also be retrofitted on current models of the 911. In this case the price from Porsche Tequipment is Euro 4,522.00 including VAT, plus fitting and paintwork.
While so far the Aerokit with its particularly sporting look was not available to drivers of the 911 Cabriolet and Targa (997), the new, striking Sport Design front apron now closes this gap, with the spoiler lip matched aerodynamically to the regular rear spoiler. Naturally, the new front panel also fits on all other versions of the 911 Carrera and 911 Targa in the 997 model series. Finished in the same colour as the car itself, the front apron in Sport Design blends harmoniously with the overall contours and silhouette of the 911.
The Aerokit retails on new cars at a price of Euro 2,368.10 including VAT and is available from Porsche Exclusive. It may also be retrofitted individually by Porsche Tequipment at a price of Euro 2,159.85 including VAT, plus the cost of fitting and paintwork.